Thursday 20 September 2012

Mid-Fi Electronics Peace Gun Fuzz

Yay, our 100th fuzz pedal layout!  And yes Vince, I know you're going to be annoyed about one of the pots! :o)  I left the power supply filter / smoothing cap optional because we know from previous experience that they can change the character of the fuzz and tame things down a bit, so I'd say only use one if you're getting too much unwanted noise.

Info from the maker about the original:

The Peace Gun by Mid-Fi Electronics is an intermodulating fuzz with a sweepable resonant filter. It has the sound of a fuzz with a lot of gain but feels like you're playing with a clean tone which makes for a very dynamic sound.






61 comments:

  1. To clarify, if I'm looking down on the dual gang, lugs 3-2-1, is 'A' the bottom row and 'B' the top?

    ReplyDelete
  2. You could always use two 5K linear pots so each side can be controlled independently. A 5 knobber! :o)

    ReplyDelete
  3. ^^ Either mate, it doesn't matter which you use.

    ReplyDelete
  4. Hmmm.. I just salvaged one joystick with three 5K pots in it :)
    +m

    ReplyDelete
    Replies
    1. Hmmm that could be very interesting if you could get away with using the third one for the Resonance pot. Joystick controlled frequency and resonance

      Delete
    2. How does it work with 3 pots, is there an x, y and z axis?

      Delete
    3. Z axis is the top knob.

      Can't say it is the same as this, but close: http://www.alibaba.com/product-gs/530394901/3_axis_3d_10k_joystick_potentiometer.html

      I need to check it, but if that third axis is 10K, well then... :) X and Y are 5K for sure.
      +m

      Delete
    4. That would be a particularly cool way to control an effect. I've seen joysticks on pedals before but thought their function seemed mostly useless, and that they were only being used because joysticks are cool! :o) But this would be different.

      Delete
    5. Just checked and damnit. It's 5K/5K/5K... Don't see any way to up it. I could stick two 2k2 resistors in series with lugs 1 and 3, but that would only give me the half of the rotation :(
      +m

      Delete
  5. Yup. It doesn't matter which you use for "A" and "B", as they work just like two separate pots.
    +m

    ReplyDelete
  6. Ok cool, Just checked and I only have one 5k left! lol... I'll order some duals as this pedal sounds pretty cool. Cheers ;o)

    ReplyDelete
  7. By the way Vince, if you build this you could still test it on a breadboard before the pot comes by just using a couple of 5K resistors and links.

    ReplyDelete
    Replies
    1. Thats sounds like far too much trouble mate lol... I'll wait til the pots arrive. There are some others I'll try in the meantime ;o)

      Cheers.

      Delete
  8. Hi, I made this pedal about 6 months ago from Mike Livesley / Doug Deeper vero layout. I made it because the few demos I found on youtube sounded good. I used five knobs.

    I can't get anything but a thin uninteresting sound out of it with my amp. Hope it works out better for you guys

    ReplyDelete
    Replies
    1. My Engl is like that, effects that sounds great with some amps just sound utter shite through it. In fact my favourite distortion pedal ever is the Zoom HL-01 (don't laugh it's brilliant!) and it sounded great through everything I ever put it through and all the other amps I currently own. When I got the Engl I tried it through that and it sounded like a swarm of bees. Worst pedal ever. Just goes to show the variations that you can get in amps that may be similar in a lot of other ways. Another good reason why Harmony Central and TGP reviews are mostly useless unless you find a reviewer using exactly the same gear.

      Or you may have just built it wrong :oD

      Delete
    2. Yes, I agree on the variations you can get with amps. The worse thing you can do, is gig without your amp but take your pedal board and just plug into the house amps. You just don't know how you will sound.

      Come to think of it the amp we use (Yamaha DG-80 112) doesn't like fuzz, as I tried a Big Muff and it also sounded awful. The only fuzz type pedals that I can get a good sound out of are the Woolly Mammmoth and an old DOD Punkifier we had. I am building The Frantone Peach this week to see if that suits.

      All other types of pedals can sound good in the front or effects loop.

      Delete
  9. I built one from Mike's layout too. It sounds like this (sometimes there is a TS on before it)--I'm guessing they're using a dirty boutique amp in that demo http://www.youtube.com/watch?v=xMaJl5u2a3Q

    ReplyDelete
  10. uhh... ya. this thing is super badass. i'm definitely gonna be tryin it this weekend. thanks mark!

    ReplyDelete
  11. Yup. Just finished this circuit as a five knobber and i have two words. Sick. Fuzz.

    It is really out there. Nice nuance circuit for specific use.. This one is definitely not for your base tone :)
    +m

    ReplyDelete
    Replies
    1. On a side note, the pinout of MPSA13 is 180 degrees of the current image. I have MPSA13s from two different batches and they are both the same way.
      +m

      Delete
    2. Cool, so you have two frequency pots? If so, do you think it's worthwhile or do you get the full range of sounds by moving them together?

      Delete
    3. Seem to work nicely as separate pots too. Moving both to same position makes the frequency just tighter and more focused - Two pots give way more possible settings... Dual pot will result in tigher control that equals in more focused sound.

      As it is so over the top, i don't see myself boxing this anytime soon (or ever). Nice experiment though.

      And to anyone reading the comments, the transistor images on the layout are now correct :)
      +m

      Delete
  12. Finished today too... Very "Roadrunner" -sounding for me!!! Good job.

    ReplyDelete
    Replies
    1. You must be a fellow finn :)

      Did you use dual pot or two 5Ks?
      +m

      Delete
    2. Yes i am. I use 10K dual.

      -t

      Delete
  13. This comment has been removed by the author.

    ReplyDelete
  14. I can't wait to build this one.

    ReplyDelete
  15. Couple of questions:

    I am doing the offboard wiring now.

    1: Off the vero it says 'Res 2&3', I assume that means that it connects to B 2&3 on the 5k dual lin pot the same way that 'Res 1' connects to A 2&3 on the 5k dual lin pot? It is just written differently.

    2: 'Volume 2 to output', can someone clarify this? Is this on the switch or the jack? If the jack is it the tip or the sleeve?

    ReplyDelete
    Replies
    1. I put the volume 2 to the footswitch where the output normally goes... I get no sound other than clean guitar with a volume cut.

      Delete
    2. 1: Res 2&3 means that you bridge your 2&3 lug of your Resonance 10klin pot. And a wire from the board to lug 2 or 3 of that pot.
      2: volume 2 to output is indeed the output on your footswitch.
      This pedal doesn't do clean :)

      Delete
    3. Ah, I put the 'Res 2&3' to the frequency dual pot not the 10k... that explains it. Easy fix if I understand it correctly. In summary, 'Res 2&3' go to the 10k bridged 2&3, but then the 10k 3 ALSO goes to the dual 5k 3?

      Delete
    4. This comment has been removed by the author.

      Delete
    5. This comment has been removed by the author.

      Delete
    6. Nevermind, I figured it out. Brain fart.

      Delete
  16. Got it to work! I was going insane with this one because no sound was coming out of it, then I saw the fatal flaw in my build: a transistor running one space to far... de-soldered it and installed it correctly and this thing is in beast mode.

    Straight onto my pedal board this thing is going.

    ReplyDelete
  17. Are the Resonance and Freq pots really supposed to work "backwards", ie. that the highest fizzes can be heard when Freq pot is turned counterclockwise all the way? And when the Freq pot is in zero position the Resonance pot hasn't got any effect on the sound?

    ReplyDelete
  18. I'm about to start building it, but just a noob question first. Why does the original pedal have 3 knobs and the schematic here has 4 (if we use a double one) or even 5 (if we use to linear ones). Which one is missing in the original???

    Sorry if the question is too lame, but I'm new to these matters!

    Greetings from Spain!

    ReplyDelete
    Replies
    1. I'll reply myself: In the website the pedal has 4 knobs! The one in this video is kinda weird.

      Delete
    2. The pedal in the video lacks "Tone" knob i think.

      Delete
  19. Built one today, really unique, never built anything like this. Its kind of like a cocked wah and fuzz together, but a very grainy fuzz, and it never gets ear piercing like some resonant filters can. Really nice pedal, and great layout.
    Thanks as usual.
    Dave

    ReplyDelete
  20. Built this and I'm waiting to wire. It says Freq A1 and B1 to ground, do they both go to ground and the ground to imput jack ? Im using your Offboard Wiring diagram. Im great at the populating/soldering, buy lack the wiring knowledge to finish project. But your insight has helped. and one last thing: is the Fil* optional PS filter cap a 100u capacitor?, and is the diagram of electro caps marked with a mins sign?

    ReplyDelete
    Replies
    1. Yes, they both go to ground, everything that goes to ground, has to be connected to the negative pole of your power supply. Yes, the optional filter cap can be anything from 100uf upwards, 100uf is generally fine though. Yes, the negative side of the capacitor is marked by the grey strip.
      Cheers
      Dave

      Delete
  21. thanks, i picked up a truck load of 80"s parts from a 75 yr old retired repair guy. Glass diodes, transistors, ICs, about 36 bins of drawers organized. If theres a part you can't fine, i most likely have it. Im a sharing Kinda person. Phillyfuzz@gmail.com

    ReplyDelete
    Replies
    1. Sounds promising, are you by any chance a member of the OSG (offset guitars forum), I'm sure there's a member over there who has a similar username to your email.....
      Cheers
      Dave

      Delete
  22. I'm getting gating / dying notes above the 12th fret on the high E. Any ideas?

    ReplyDelete
  23. THX,Ivlark:) Done!! Awesome sound like this… https://soundcloud.com/metroxnero/octfuzz-nero-pedal-first-impression

    ReplyDelete
  24. This comment has been removed by the author.

    ReplyDelete
  25. Hello
    thanks for the great job you have done here. I already have built a few of the layouts. I'm looking for the sound that I heard in the video at 2:48 where he turns the volume down on the guitar. can I add a volume in front of it .input to 1 , 3 to ground and 2 as the new input.is that it? is 100k ok?
    thank you

    ReplyDelete
    Replies
    1. to add an input volume control you'd want the input to go to lug 3, lug 2 would go to the board input, and lug 1 ground.

      Delete
    2. This comment has been removed by the author.

      Delete
    3. Thanks a lot . should I then add a booster after it ? Is it good practice anyway? thanks again.

      Delete
  26. Hi, is there really 50n cap? I can't find any 50n caps on market.

    ReplyDelete
    Replies
    1. Any nearest value is fine and probably still within component tolerances. Just use a 47n. If you want more bass input try a larger value.

      Delete
  27. hey there, just got done building this one...sounds great!!! thanks so much for all the work you guys put in here.
    one little problem...
    i have the feeling that the tone is kinda dying with the string swinging less and less. is this normal (of course, besides that the tone eventually stops when there's no input anymore ;-) or could it be a broken part or some mistake i made?
    cheers and keep it up!!!

    ReplyDelete
  28. Hi,
    Is there a way to add a switch to bypass the fuzz (or make the fuzz much less fuzzy), and keep only the resonant filter ?

    ReplyDelete
  29. Also, does the resonance goes up to self-oscillation ? (if not, is there any way to increase the resonance) ?

    ReplyDelete
  30. Ok, i built it today, and i confirm that is sounds amazing.
    I can also confirm that it seems that the filter and the resonance pots are backwards.
    I suggest to add an input gain pot, as changing the input gain makes the sound change drastically.
    Having both a filter and a tone pot is great to create many different sounds.
    Very nice fuzz !

    ReplyDelete
  31. Many thanks for sharing this schematic. I've just finished it. It's a low gain fuzz which has a peak at high frequency and cuts some low-end. It works better with a cranked amp or a dirt pedal than a sole clean amp as other old style fuzz pedals do. I've also confirmed that "Frequency Pot" works backward as some people have already mentioned here. "Tone Pot" does the same. You just need to swap the wirings to Lug-1 and Lug-3 if you want them to work in clockwise for brighter sound, and in counterclockwise for darker sound.

    ReplyDelete